1967-1979 F100 / F150 4wd and 1978-79 Bronco 2005+ Super Duty front end kit instructions.

A few things to know before getting started:

-This kit is not for Supercab applications with leaf sprung original front ends. Those frames accept the F250 lowboy parts.

​

-1976 and older trucks require changing the steering box to either a 1976-79 style (which I do not have instructions for) or a 2005-07 SD steering box which requires changing out the engine crossmember and that's a fairly big job

​

-These kits are overall one of the easiest to install when using a 77-79 steering box, and one of the more difficult to install when using a 2005-07 SD steering box because of the engine crossmember replacement.

-No cutting is required when used with 77-79 steering box
 

​

Parts you will need to purchase separately:

• Front axle- 2005-2016

• Front coil springs- used oem 2005+ SD springs work great

• Front coil spring isolators- From a 2005+ SD. These go between spring and bucket. See part number 5C3Z-5415-AA

• Front radius arms from any 2005+ SD

• Front Shocks- 2005+ SD

• 2005-16 SD track bar

• Length of 1.5" OD 1.0" ID DOM tube such as TU1031 from Summit Racing

• I recommend buying new tie rod ends and ball joints.

• Front rubber brake lines for a 2005-2007 super duty 4wd

• You may be able to reuse your original steering shaft, but if that doesn't work, Borgeson 000970

• Bump Stops- Energy Suspension 9.9137G or similar

​